Advantages
- Maximum output: 1000 lumens
- Maximum beam distance: 500 m / 1640 ft.
- Rechargeable
- Adjustable beam
LMP1018 LED flashlight features
- LED: CREE XML-U3 x 1
- 3 light modes: high – low – strobe
- Output: low mode: 500 lumens – high mode: 1000 lumens
- Beam distance: low mode: 228 m / 748 ft. – high mode: 500 m / 1640 ft.
- Voltage: 3.7 V
Reliable and efficient
- 2-year guarantee
- Watertightness: shower proof – IPX4
- Runtime: high mode: 2 hours – low mode: 4 hours
- Material: 6063 aluminium alloy (anodised finish)
- Impact resistance: 1 m / 4 ft.
LMP1018 LED flashlight specifications
- Dimensions: diametre 50 mm / 2 in. x length 171 mm / 6.7 in.
- Weigth: 275 g / 9.7 oz.
- Power: 1 x 26650 rechargeable battery 3.7 V Li-ion (supplied)
Operation
- To power the light on, depress the power switch once.
- Depress the power switch again to cycle through light modes (high -> low -> strobe).
- Once you are finished using the flashlight, depress the power switch again to click off.
| PRODUCT | FLASHLIGHT LMP1018 |
| LIGHTING | 1 white LED |
| LIGHT MODES | 3 |
| MAXIMUM BEAM DISTANCE | 500 m / 1640 ft |
| MAXIMUM OUTPUT | 1 000 lumens |
| ADJUSTABLE BEAM WIDTH | yes |
| MATERIAL | Anodised aluminium alloy |
| ANTI-ROLL DESIGN | yes |
| WATERTIGHTNESS | Showerproof (IP 44) |
| POWER SUPPLY | 1 x 26650 rechargeable battery (included) |
| MAXIMUM RUNTIME | 4 hours (continuous use) |
| WEIGHT | 275 g / 9.7 oz |
1 LMP1018 LED flashlight
1 26650 rechargeable battery 3.7 V Li-ion
1 charger
1 wrist strap
1 user’s guide
Maintenance
- Gently blow away any dust and debris on the lens (or use a soft lens brush). To remove dirt or fingerprints, clean with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage.
- For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid on the cleaning cloth – never directly on the lens.
- Periodic cleaning of the battery contacts improves the flashlight’s performance as dirty contacts may cause the flashlight to flicker, shine intermittently or even fail to illuminate.
- Every 6 months, clean the threads of the tail cap and flashlight tube with a dry cloth and then apply a thin coat of silicone lubricant on the rubber O-ring.
- Never remove the lens head or any internal components. Doing so can potentially damage the flashlight and voids the guarantee.
Cautions for use
- Fully charge your flashlight before first use.
- Do not attempt to charge the flashlight with any other charger than the one supplied.
- The flashlight is a high-intensity lighting device capable of causing eye damage. Avoid shining the flashlight directly into anyone’s eyes.
- Operating time of your flashlight depends on continuous or intermittent use. Intermittent operation extends the runtime of the battery.
- The LED is a lifetime light source. It will never need to be replaced.
- If the flashlight will not be used for an extended period, remove the battery.
- Because the device is a high light output flashlight, it can reach high temperature. It is normal for the flashlight’s aluminium body to get very warm during continuous use. Keep away from children. Use caution when handling.
Reviews