PIE1048 ALL-IN-ONE PACK

• PIR sensor (motion sensor):
  • Wide detection angle: 90°
  • Detection distance: up to 65 feet (20 meters)
  • Adjustable sensitivity: low / medium / high
• Infrared flash:
  • Invisible black LEDS – Wavelength: 940 nm
  • Range: up to 65 feet (20 meters)
  • Automatic IR Flash (activated according to brightness)
• Field of view: 55°
• Trigger speed: between 0.2 and 0.6 second
• Capture modes:
  • Still images: from 1 to 3 images per trigger
  • Videos with audio recording: programmable length from 5 seconds to 10 minutes
  • Still images + videos with audio recording: a still photo and a video clip are both captured for each trigger
• Image resolution: 1 MP / 3 MP / 5 MP / 8 MP / 12 MP / 16 MP
• Image file format: JPEG
• Video resolution: QVGA / VGA / 720×480 / HD 720P / Full HD 1080P
• Video file format: AVI
• PIR detection mode: the camera will take photos or videos when triggered by the PIR sensors (motion sensors) detecting activity in the area they cover
• Time Lapse mode: the camera will take photos or videos automatically at your choice of interval during a defined period of time you set up
• Photos stamped with the time and date
• Memory support: SD card or micro SD card with adapter from 4GB up to 32GB, class 10 minimum
• Programmable identification number of the device: allows you to identify from where and from wich camera the photos are (useful when you have more than one device)
• Programmable password
• Cycle recording function: when the SD card is full, the camera continues
  to record photos/videos by deleting the earliest photos or video clips

Reliable and efficient

• 2-year warranty
• Weather resistant (IP66)
• Compatible with external power (power pack or solar panel)

PIE1048 trail camera specifications

• Weight: 263 g (without batteries)
• Dimensions: 135 x 93 x 69 mm
• Power: 8 x  AA alkaline batteries
• External DC port (6V/1A)
• 2.4″ color LCD screen
• Built-in mini 2.0 USB port for downloads

Listed below are some useful pointers on how to use your trail camera to get the best results

• Mount the camera about 1.5~2 m (5~6 ft) high with the camera pointed at a slight downward angle.
• Mount the trail camera facing north or south not east or west as the rising ans setting of the sun could produce false triggers and overexposed images.
• If you’re covering a trail, face the camera down or up the trail.
• Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).