Trail camera – model PIE1073 – Dual image sensor – Wi-Fi function – Built-in solar panel

• Via a free mobile application, the Wi-Fi function allows you to remotely:
  
  • view, download or delete recorded photos and videos
  • take photos and videos
  • change the product settings
  • check the remaining energy level and memory capacity
• Free mobile app name: WILDLIFE CAM (Android/iOS)
• The device creates its own Wi-Fi network, no need to be near a box.
• The Wi-Fi function is activated by Bluetooth from a smartphone.
• Built-in rechargeable lithium battery:
  • 3.7V – 4400mAh
  • The battery can be charged with solar energy or with the supplied USB cable
• 3 PIR sensors (motion and heat sensors):
  • 1 central PIR sensor + 2 side PIR sensors
  • Detection angle: 120° | Central PIR: 60° | Side PIR: 30° each
  • Detection distance: up to 65.6 feet (20 meters)
  • Adjustable detection sensitivity: High | Medium | Low
  • Side PIR sensors can be deactivated.
• Infrared flash:
  • 2 invisible high intensity infrared LED | Wavelength: 950 nm
  • Flash range: up to 65.6 feet (20 meters)
  • Automatic IR Flash (activated according to ambient brightness)
  • Adjustable flash brightness: Auto | Medium | Low | OFF
    
• Very quick trigger speed: approximately 0.3 seconds
• Capture modes:
  • Still images: from 1 to 10 images per trigger
  • Videos: programmable length from 5 seconds to 3 minutes | Programmable audio recording (ON | OFF)
  • Still images + videos: a still photo and a video clip are both captured for each trigger
• Image sensor:
  • Day: 13 MP high resolution colour CMOS
  • Night: 2 MP
• Image resolution:
  • Day: up to 60 MP
  • Night: up to 4 MP
• Programmable shutter speed: 1/15 | 1/20 | 1/30
• Image file format: JPEG
• Video resolution:
  • Day: up to 4K
  • Night: up to FULL HD
• Video length programmable from 5 seconds up to 3 minutes
• Automatic video lengthening function: if the user sets the video length to 20 seconds and the automatic video lengthening feature is activated, the camera will record beyond the programmed 20 seconds as long as the PIR sensors keep on detecting something in front of the camera (for 3 minutes maximum).
• Programmable audio recording (ON | OFF)
• Video file format: MPEG-4
• PIR detection mode: the camera will take photos and/or videos when triggered by the PIR sensors (motion and heat sensors) detecting activity in the area they cover.
• Time Lapse mode: the camera will take photos and/or videos automatically at your choice of interval. In this mode, the PIR sensors are deactivated (the is no motion/heat detection). If Time Lapse interval is set to 30 minutes, the camera will record a photo/video automatically every 30 minutes.
• Programmable operating periods: each day, the device can operate 24 hours a day or only during the user defined time slots.  Two diffrent periods can be programmed.
• Stamp on photos: date, time, ambient temperature, moon phase, energy level, camera name
• Memory support: SD card up to 256GB, U1 class 10 minimum (not supplied). You can purchase micro SD cards with adapters from the present website at any time.
• Night capture when energy level is low: 2 choices
  • No IR flash: at night, if the power level is too low, the device will take photos/videos without triggering the infrared flash.
  • No capture, at night, if the power level is too low, the device will no longer take photos/videos. It will take them only by day.
• Programmable device name: very useful for users with multiple products – allows them to identify from from which camera the photos are
• Programmable password
• Cycle recording on the memory card: programmable (ON | OFF) – with this parameter set to ON, when the memory card will be full, the camera will continue to record photos/videos by deleting the oldest ones.
• Location for a padlock on the device

Reliable and efficient

• 2-year warranty
• Weather resistant (IP66)
• Trigger speed: approximately 0.3 seconds

PIE1073 trail camera specifications

• Weight: 454g
• Dimensions: 163 x 112 x 77.5mm
• Power: built-in solar panel and rechargeable battery (3.7V – 4400 mAh)
• LCD screen: TFT colour screen 2.4″ | 320 x 240 (RGB) | Allows you to change settings and to view photos and videos2
• 2 USB ports: 1 for downloading images/videos download | 1 to charge built-in battery
• Name of the free mobile app (iOS/Android): WILDLIFE CAM

Listed below are some useful pointers on how to use your trail camera to get the best results

• Mount the camera about 1.5~2 m (5~6 ft) high with the camera pointed at a slight downward angle.
• Mount the trail camera facing north or south not east or west as the rising ans setting of the sun could produce false triggers and overexposed images.
• If you’re covering a trail, face the camera down or up the trail.
• Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).
• Check battery level.
• Make sure the memory card is properly inserted and have sufficient available space.
• Check time and date are correct.
• Make sure to turn on the camera before leaving the area (power switch in the ON position).