Trail camera – model PIE1076

• PIR sensors (motion and heat sensors)
  • 1 central sensor + 2 side sensors
  • Wide detection angle: 120° in total | Central sensor: 90°
  • Detection distance: up to 65 feet (20 meters)
  • Adjustable sensitivity: Low | Medium | High
• Invisible infrared flash for nighttime photos and videos
  • 34 invisible black LED
  • Wavelength: 940 nm
  • Adjustable flash range: Short | Medium | Long
  • Maximum range: up to 65 feet (20 meters)
  • Automatic IR Flash (activated according to brightness)
• Field of view: 84°
• Trigger speed: 0.3 seconds
• 3 capture modes
  • Photos: from 1 to 5 images per trigger
  • Videos: programmable length from 5 seconds to 10 minutes | Programmable audio recording
  • Photos + video: a still photo and a video clip are both captured for each trigger
• Photo resolution: programmable up to 48 MP
• Photo file format: JPG
• Video resolution: programmable up to 4K
• Video file format: AVI
• 3 operating modes
  • Motion detection mode: the camera will take photos or videos when triggered by the PIR sensors (motion/heat sensors) detecting activity in the area they cover.
  • Time Lapse mode: the camera will take photos or videos automatically at a user-set interval. In this mode, the PIR sensors are deactivated (there is no motion/heat detection). If the interval is set to 30 minutes, the camera will take photos/videos automatically every 30 minutes.
  • Time Lapse + video mode: the camera will take photos automatically at a user-set interval then generate a video from these photos. In this mode, the PIR sensors are deactivated (there is no motion/heat detection). If the interval is set to 30 minutes, the camera will take photos/videos automatically every 30 minutes.
• Programmable operating time: the device can operate 24 hours a day or only during a user-defined time period.
• Programmable time stamp on photos: if this parameter is set to ON, the following information will be imprinted at the bottom of each photo: date and time the image was captured, temperature, moon phase, battery power level and camera name (if the user programmed one).
• Memory support: micro SD card  up to 512GB, class 10 minimum (not supplied). You can purchase micro SD cards from the present website at any time.
• Programmable camera: very useful for users with multiple products – Allows them to identify from from which camera the photos are
• Programmable password
• Programmable cycle recording function: when the memory card is full, the camera continues to record new photos/videos by deleting the earliest photos or video clips

Reliable and efficient

• 2-year warranty
• Weather resistant (IP65)
• Compatible with external power (power pack or solar panel)

PIE1076 trail camera specifications

• Weight: 277 g without batteries |  465 g with batteries
• Dimensions: 141 x 96 x 84 mm
• Power: 8 x  AA batteries (alkaline, lithium or rechargeable Ni-MH – not supplied) – You can purchase batteries from the present website at any time.
• External DC port (6V/2A) – You can purchase a power pack or solar panel from the present website at any time.
• 2.0″ colour LCD screen
• Built-in USB Type-C port for downloads (USB cable supplied)

Listed below are some useful pointers on how to use your trail camera to get the best results

• Mount the camera about 1.5~2 m (5~6 ft) high with the camera pointed at a slight downward angle.
• Mount the trail camera facing north or south not east or west as the rising ans setting of the sun could produce false triggers and overexposed images.
• If you’re covering a trail, face the camera down or up the trail.
• Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).
• Check the power level of the batteries.
• Make sure the memory card is properly inserted and have sufficient available space.
• Check time and date are correct.
• Make sure to turn the camera ON (power switch in the ON position).